LONGVIEW, Wash. — New details emerged Friday on the deadly Longview paper mill tank failure that killed 11 workers.
Officials provided an update on their investigation into Nippon Dynawave, calling this the largest workplace safety violation in state history.
Over 70 witnesses have been interviewed, and more than 40,000 documents have been reviewed, including inspection records for the plant and safety plans.
The plant is being fined around $10 million for 75 violations, according to officials.
The previous largest fine, of $2.9 million, was issued after the Tesoro refinery explosion in 2010, according to Labor & Industries (L&I).
At the federal level, OSHA has only issued three penalties larger than $9 million in its history.
During Friday’s news conference, officials said there was too much pressure on the tank’s walls and had been for over a year. They said that 900,000 gallons of white liquor were being held back by walls that were thinner than a quarter.
“Our findings are shocking and heartbreaking. Nippon Dynawave had all the information they needed to act, but they didn’t listen to alarms their consultants and staff were raising. Tragically, there are 11 families whose loved ones never came home as a result, and many others whose lives will be changed forever,” said Joel Sacks, L&I director.
Officials said they will be referring the case to prosecutors for possible criminal charges.
In a statement to KIRO, Sam Jefferies, Nippon Dynawave spokesperson, said the company has cooperated with L&I throughout its investigation, and that it took issue with some of the findings from the investigation.
“We are now reviewing its findings in detail. The report’s characterization of NDP’s actions as “egregious and willful serious” failed to include important facts and context regarding actions taken by NDP and the timeline of events leading up to and on the day of the May 26th incident. We will address that issue through the appropriate appeals process," Jefferies wrote.
“We are also reviewing Ecology’s penalty and the anticipated cost recovery request in detail, including the basis for each, before determining next steps.
We are committed to establishing a complete and accurate account of the May 26 incident to help prevent future tragedies. It is important to distinguish between the workplace safety findings in L&I’s report and a determination of what caused the May 26 incident. The report does not establish root cause, which remains under investigation.
We will continue to cooperate with the appropriate agencies. We believe the responsible course is to allow the full investigative process to proceed and establish a complete and accurate record before conclusions are reached."
The company said it would not provide further comment to questions raised by KIRO 7 about the conclusions of the investigation.
The American Forest & Paper Association and the Northwest Pulp Association issued the following joint statement on Friday’s news conference:
“Our thoughts remain with the families, co-workers and the entire Longview community affected by the May 26 tragedy. We are in the process of reviewing the report’s findings.
Safety remains our industry’s highest priority. AF&PA and NWPPA are working proactively with union representatives at the Association of Western Pulp and Paper Workers on legislative solutions to ensure this type of tragedy does not happen again.”
Day of the incident: What happened?
On Tuesday, May 26, 2026, at around 1:55 a.m., the mill’s digestor had an unexpected problem called a process upset. Operators had to take it offline so it could be repaired.
A digestor is a major piece of equipment used in the pulping process. Normally, white liquor is fed into the digestor to help break down wood chips into pulp.
According to the report, workers reduced the amount of white liquor being sent to the digestor and by 4:08 a.m. they completely shut off the flow.
While white liquor was no longer leaving G Tank, more white liquor was still being produced upstream, according to the report, which meant the tank rose to about 90% full by 6:22 a.m.
At approximately 7:09 a.m., the tank catastrophically failed, releasing approximately 900,000 gallons of white liquor.
At the time of the tank failure, the report states that 17 employees were present on the ground level:
- Seven maintenance employees and one foreman were in the mechanical maintenance shop
- Eight maintenance employees were in the electrical maintenance shop
- One operator was in the courtyard
READ: Who were the victims of the Longview deadly implosion
According to the U.S. Chemical Safety and Hazard Investigation Board’s report, most of the tank’s contents were released when it failed, creating a massive “wave” of white liquor that rapidly flooded into the courtyard and towards the buildings.
11 people ultimately died and a number of others were hurt.
The investigation into what happened is ongoing.
Workers at the Longview plant headed back to work last month – five months after the tragedy.
Employees will continue to receive pay through January 17, 2027, even if their departments cannot resume operations.
©2026 Cox Media Group



